交通燈本身有多款選擇....選了一款無正方框在外圍...
問題a: 同一方向想放幾支要點做?
問題b:想用同一款放第二個方向點做?
問題c:如何把同一路口多個方向的交通燈連成一個有系統的組合
問題d:traffic light的opitions是否要輸入什麼~?

thx~

B. 填rot.，較角度
C. 禁parent to,再禁相應路口
D. 填燈位次序，完成C先有用

愛麗絲公主 :交通燈本身有多款選擇....選了一款無正方框在外圍...
問題a: 同一方向想放幾支要點做?
問題b:想用同一款放第二個方向點做?
問題c:如何把同一路口多個方向的交通燈連成一個有系統的組合
問題d:traffic light的opitions是否要輸入什麼~?

thx~

Hints:

1. Identify which direction is "Main", which direction is "Side"
2. The lights are only showing the logic of the crossing. You cannot modify traffic by reversing "Main" and "Side" combinations.
3. The "vacation" arrow is for the "Main" bound and some "Side" bound, and will light up after that side turned red.

About your question:

1. Just press N to copy.
2. Press G / R to move it and then reconfigure the light "Option".
3. Click "Parent to" then select the junction.
4. Options "0" = Main
   "1" = Side
   "2" = Main ped
   "3" = Side ped
   "4" = Vacation main
   "5" = Vacation side
   A rule of thumb is 0+3 on the main bound, 1+2 on the side bound

咁係咪即係同時只可以一套一套線?十字路口唔可以逐邊出車?

arthurMM :咁係咪即係同時只可以一套一套線?十字路口唔可以逐邊出車?

係

kmb71k :我想問一個 T 字路口
三盞交通燈同時著晒綠燈
可以點攪?

三 盞 着 晒 代 表 你 無 睇 manual